Cooling Water Treatment

Water is a commonly used cooling agent in the industry. In each cooling equipment, the condenser, heat exchanger, and the cooling tower packing have to keep working optimally to accomplish maximum efficiency. This can only be accomplished with sufficient water treatment to inhibit the corrosion that can occur and to prevent the formation of organic and inorganic scale/deposits. Good maintenance and treatment are also necessary to control the growth of the Legionella bacteria.

AQUATREAT has a wide variety of high technology products to propose an optimal treatment for each system. We have products to treat open recirculating cooling systems as well as closed systems and once-through cooling systems to prevent the mentioned problems.

AQUATREAT 202
 

– Excellent dispersion
– Corrosion inhibition
– Strong bio-dispersing
– Prevents and removes inorganic scale
– Cleaning properties
– No acid dosing required
– Active against biofouling, synergy with biocides

Read more

Boiler Chemical Feed

Many heat applications use water as a heat medium. In most cases, these systems should be treated to avoid corrosion and deposits to minimize heat loss, repairs, and production losses.
Aquatreat provides for the treatment of the above system’s high-tech, environmentally friendly products that are cost-saving by their very efficient operation.

Here you will find more information about our main products for the treatment of boiler water for low, middle, and high-pressure steam boilers.

  • AQUATREAT 650 is a one-shot product that can be dosed by a single dosing pump, a total treatment of feed tank, boiler water and steam/condensate lines is realized.
  • Thanks to years of intensive R&D/optimization production processes, we managed to bring the most concentrated product on the market for this total treatment.
  • All existing chemical components meet FDA § 173.310. (allowed chemical components if the steam is formed in direct contact with food).
  • In the steam phase ammonium carbonate or ammonium bicarbonate are formed. Both chemical components are used as a food additive (European Regulation No 1333/2008)!
  • All chemical components are REACH-registered for all relevant identified uses.

AQUATREAT 650

  • Thanks to the use of AQUATREAT 650 all problems (oxygen/General corrosion, inorganic/organic deposits, making wet steam, acid corrosion, condensate lines …) are reduced to a minimum.! Even silicate deposits can be removed by (long-term, but safe) use of AQUATREAT 650! Thanks to an optimization of the blowdown quantity, it is possible to achieve the lowest possible energy, water, and chemicals invoice.
  • By utilizing AQUATREAT 650  your installation will conform with the European standards:
    o Fire tube boilers: EN_12953-10: 2003
    o Water tube boilers: EN_12952-12: 2003

AQUATREAT 690
AQUATREAT 690 is a liquid product, suitable for the treatment of boiler water to prevent corrosion and deposits in the boiler. AQUATREAT 690 protects the steam and condensate lines against corrosion. Also, the product will slowly remove existing deposits.

AQUATREAT 690 is phosphate-free

AQUATREAT 695
AQUATREAT 695 is a liquid product, suitable for the treatment of boiler water to prevent corrosion and deposits in the boiler. AQUATREAT 695 protects the steam and condensate lines against corrosion. Also, the product will slowly remove existing deposits. AQUATREAT 695 is extremely suitable to use at feed water with low buffering capacity as RO-, demineralized water or feed water with a large proportion return condensate.
Application: Boilers with return-condensate, RO or demi-water as feed water.

 

Diagram Boiler Chemical Feed

Read more

PAC-04 Polyaluminium Chloride

Polyaluminium chloride, pac, pac-04,coagulant,blupac,drum dried type,brown pac

Specifications: PAC-04 Grade
Appearance: Solid Powder, Brown
Al 2 O3 Content %: 28 min
Basicity %: 50.0~90.0
Insolubles % : 1.5 max
pH(1% water solution): 3.5~5.0

ABOUT PRODUCT

CHEMICAL NAME: PAC-04Brown Type Polyaluminium Chloride
DESCRIPTION: BLU PAC-04, it is Polyaluminum Chloride, brown powder, used for water treatment, work as coagulant.
It’s made by Ca(OH)3 and Bauxite.
ADVANTAGES:
  1. Can be used widely for industrial application.
  2. Easily soluble in water; dissolves rapidly.
  3. Cost is very low, very competitive than other general coagulants
  4. Dosage will be less(20-50%) than drum dried PAC
  5. Floc forming fast, good activity, good filtering.
  6. Don’t need adding alkaline additives, if deliquescence, its effect remain same.
  7. Adapted for a wide pH value, strong adaptability
  8. The Salt content in the effluent will be reduced after use PAC.
  9. Can remove the water pollution of heavy metals and radioactive substances.
  10. The active ingredient of high, convenient storage and transportation.
APPLICATION FIELDS:
  1. Coagulant for different industrial area
  2. Clarifying agent in waste water
  3. Dewatering agent

APPLICATION PROCESS

APPLICATION:
  1. Suggested to dilute to the concentration of 2%-20% solution before use.
  2. For Solid PAC product, dilution is necessary before being dosed, water amount for dilution shall be determined based on the amount of the chemicals to be dosed and the quality of water to be treated.
  3. For Solid PAC products, the dosage is about 1-15g/mt, the dosage of liquid PAC is 3-40g/mt, the best dosage is based on different   lab test results.
PACKAGE: Packed in inner plastics bags(white or yellow) and polypropylene woven bags, with each bag containing 25kgs.
STORAGE: Should be stored in original containers in cool and dry place, away from sources  of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.
Read more

Polyaluminium Chloride

[fusion_builder_container hundred_percent=”no” equal_height_columns=”no” menu_anchor=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” background_color=”” background_image=”” background_position=”center center” background_repeat=”no-repeat” fade=”no” background_parallax=”none” enable_mobile=”no” parallax_speed=”0.3″ video_mp4=”” video_webm=”” video_ogv=”” video_url=”” video_aspect_ratio=”16:9″ video_loop=”yes” video_mute=”yes” overlay_color=”” overlay_opacity=”0.5″ video_preview_image=”” border_size=”” border_color=”” border_style=”solid” margin_top=”” margin_bottom=”” padding_top=”20px” padding_right=”” padding_bottom=”20px” padding_left=””][fusion_builder_row][fusion_builder_column type=”1_1″ layout=”1_1″ spacing=”” center_content=”no” hover_type=”none” link=”” min_height=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” background_color=”” background_image=”” background_position=”left top” background_repeat=”no-repeat” border_size=”0″ border_color=”” border_style=”solid” border_position=”all” padding=”” dimension_margin=”” animation_type=”” animation_direction=”left” animation_speed=”0.3″ animation_offset=”” last=”no”][fusion_text]

BLU PAC SERIES PAC-01 POLYALUMINIUM CHLORIDE POWDER Blu PAC-01 is white powder polyaluminium chloride, spray drying type, high purity, high bacisity, mainly used for potable water treatment, also used for wastewater treatment, food grade.

[/fusion_text][fusion_text]

PROPERTIES

[/fusion_text][fusion_table]

Specifications: PAC-01 Spry drying type
Appearance: White Powder
Al 2O3,% ≥ 30.0
Basicity, % 45.0~55.0
Insolubles, % 0.3 max
SO42-, % 0.5 max
N, % 0.01 max
As, % 0.0002 max
Mn, % 0.0045 max
Cr6+, % 0.0005 max
Hg, % 0.00001 max
Pb, % 0.001 max
Cd, % 0.0002 max
Fe, % 0.005 max
PH(1% water solution) 3.5~5.0

[/fusion_table][/fusion_builder_column][fusion_builder_column type=”1_1″ layout=”1_1″ spacing=”” center_content=”no” hover_type=”none” link=”” min_height=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” background_color=”” background_image=”” background_position=”left top” background_repeat=”no-repeat” border_size=”0″ border_color=”” border_style=”solid” border_position=”all” padding=”” dimension_margin=”” animation_type=”” animation_direction=”left” animation_speed=”0.3″ animation_offset=”” last=”no”][fusion_text]

ABOUT PRODUCT

[/fusion_text][fusion_table]

CHEMICAL NAME: Spray drying type Polyaluminium Chloride
DESCRIPTION: BLU PAC-01 it is Polyaluminium Chloride, spray drying type, white powder, used for drinking water treatment and paper mills as retention agent, work as coagulant for water treatment. It is made by purity raw materials of Al(OH)3. Food grade.
ADVANTAGES:
  1. Can be used widely for industrial application.
  2. Easily soluble in water; dissolves rapidly.
  3. Cost is very low, very competitive than other general coagulants
  4. Dosage will be less(20-50%) than drum dried PAC
  5. Floc forming fast, good activity, good filtering.
  6. Don’t need adding alkaline additives, if deliquescence, its effect remain same.
  7. Adapted for a wide pH value, strong adaptability
  8. The Salt content in the effluent will be reduced after use PAC.
  9. Can remove the water pollution of heavy metals and radioactive substances.
  10. The active ingredient of high, convenient storage and transportation.
APPLICATION FIELDS:
  1. Coagulant for different industrial area
  2. Clarifying agent in waste water
  3. Dewatering agent

[/fusion_table][/fusion_builder_column][fusion_builder_column type=”1_1″ layout=”1_1″ spacing=”” center_content=”no” hover_type=”none” link=”” min_height=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” background_color=”” background_image=”” background_position=”left top” background_repeat=”no-repeat” border_size=”0″ border_color=”” border_style=”solid” border_position=”all” padding=”” dimension_margin=”” animation_type=”” animation_direction=”left” animation_speed=”0.3″ animation_offset=”” last=”no”][fusion_text]

APPLICATION PROCESS

[/fusion_text][fusion_table]

APPLICATION:
  1. Suggested to dilute to the concentration of 2%-20% solution before use.
  2. For Solid PAC product, dilution is necessary before being dosed, water amount for dilution shall be determined based on the amount of the chemicals to be dosed and the quality of water to be treated.
  3. For Solid PAC products, the dosage is about 1-15g/mt, the dosage of liquid PAC is 3-40g/mt, the best dosage is based on different   lab test results.
PACKAGE: Packed in inner plastics bags(white or yellow) and polypropylene woven bags, with each bag containing 25kgs.
STORAGE: Should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

[/fusion_table][/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]

Read more

PAC-02 Polyaluminium Chloride

[fusion_builder_container hundred_percent=”no” equal_height_columns=”no” menu_anchor=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” background_color=”” background_image=”” background_position=”center center” background_repeat=”no-repeat” fade=”no” background_parallax=”none” enable_mobile=”no” parallax_speed=”0.3″ video_mp4=”” video_webm=”” video_ogv=”” video_url=”” video_aspect_ratio=”16:9″ video_loop=”yes” video_mute=”yes” overlay_color=”” overlay_opacity=”0.5″ video_preview_image=”” border_size=”” border_color=”” border_style=”solid” margin_top=”” margin_bottom=”” padding_top=”20px” padding_right=”” padding_bottom=”20px” padding_left=””][fusion_builder_row][fusion_builder_column type=”1_1″ layout=”1_1″ spacing=”” center_content=”no” hover_type=”none” link=”” min_height=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” background_color=”” background_image=”” background_position=”left top” background_repeat=”no-repeat” border_size=”0″ border_color=”” border_style=”solid” border_position=”all” padding=”” dimension_margin=”” animation_type=”” animation_direction=”left” animation_speed=”0.3″ animation_offset=”” last=”no”][fusion_text]

Blu PAC-02 is light yellow powder polyaluminium chloride, spray drying type, high purity, high bacisity, mainly used for potable water treatment, also used for wastewater treatment, food grade.

[/fusion_text][fusion_table]

PROPERTIES

 

Specifications: PAC-01 Spry drying type
Appearance: White Powder
Al 2O3,% ≥ 29.0
Basicity, % 50.0~85.0
Insolubles, % 0.3 max
SO42-, % 0.5 max
N, % 0.09 max
As, % 0.0005 max
Mn, % 0.0045 max
Cr6+, % 0.0005 max
Hg, % 0.00001 max
Pb, % 0.001 max
Cd, % 0.0002 max
Fe, % 0.005 max
PH(1% water solution) 3.5~5.0

[/fusion_table][/fusion_builder_column][fusion_builder_column type=”1_1″ spacing=”” center_content=”no” hover_type=”none” link=”” min_height=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” background_color=”” background_image=”” background_position=”left top” background_repeat=”no-repeat” border_size=”0″ border_color=”” border_style=”solid” border_position=”all” padding=”” dimension_margin=”undefined” animation_type=”” animation_direction=”left” animation_speed=”0.3″ animation_offset=”” last=”no”][fusion_text]

ABOUT PRODUCT

[/fusion_text][fusion_table]

CHEMICAL NAME: PAC-02 Spray drying type Polyaluminium Chloride
DESCRIPTION: BLU PAC-02type, is Polyaluminum Chloride of spray drying type, pale yellow powder, used for drinking water treatment and paper mills as retention agent, work as coagulant for water treatment.

It is made by purity raw materials of Al(OH)3. Food grade.

ADVANTAGES:
  1. Can be used widely for industrial application.
  2. Easily soluble in water; dissolves rapidly.
  3. Cost is very low, very competitive than other general coagulants
  4. Dosage will be less(20-50%) than drum dried PAC
  5. Floc forming fast, good activity, good filtering.
  6. Don’t need adding alkaline additives, if deliquescence, its effect remain same.
  7. Adapted for a wide pH value, strong adaptability
  8. The Salt content in the effluent will be reduced after use PAC.
  9. Can remove the water pollution of heavy metals and radioactive substances.
  10. The active ingredient of high, convenient storage and transportation.

APPLICATION
FIELDS:

  1. Coagulant for different industrial area
  2. Clarifying agent in waste water
  3. Dewatering agent

[/fusion_table][/fusion_builder_column][fusion_builder_column type=”1_1″ spacing=”” center_content=”no” hover_type=”none” link=”” min_height=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” background_color=”” background_image=”” background_position=”left top” background_repeat=”no-repeat” border_size=”0″ border_color=”” border_style=”solid” border_position=”all” padding=”” dimension_margin=”undefined” animation_type=”” animation_direction=”left” animation_speed=”0.3″ animation_offset=”” last=”no”][fusion_text]

APPLICATION PROCESS

[/fusion_text][fusion_table]

APPLICATION:
  1. Suggested to dilute to the concentration of 2%-20% solution before use.
  2. For Solid PAC product, dilution is necessary before being dosed, water amount for dilution shall be determined based on the amount of the chemicals to be dosed and the quality of water to be treated.
  3. For Solid PAC products, the dosage is about 1-15g/mt, the dosage of liquid PAC is 3-40g/mt, the best dosage is based on different   lab test results.
PACKAGE: Packed in inner plastics bags(white or yellow) and polypropylene woven bags, with each bag containing 25kgs.
STORAGE: Should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

[/fusion_table][/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]

Read more

PAC-031 Polyaluminium Chloride

[fusion_builder_container hundred_percent=”no” equal_height_columns=”no” menu_anchor=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” background_color=”” background_image=”” background_position=”center center” background_repeat=”no-repeat” fade=”no” background_parallax=”none” enable_mobile=”no” parallax_speed=”0.3″ video_mp4=”” video_webm=”” video_ogv=”” video_url=”” video_aspect_ratio=”16:9″ video_loop=”yes” video_mute=”yes” overlay_color=”” overlay_opacity=”0.5″ video_preview_image=”” border_size=”” border_color=”” border_style=”solid” margin_top=”” margin_bottom=”” padding_top=”20px” padding_right=”” padding_bottom=”20px” padding_left=””][fusion_builder_row][fusion_builder_column type=”1_1″ layout=”1_1″ spacing=”” center_content=”no” hover_type=”none” link=”” min_height=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” background_color=”” background_image=”” background_position=”left top” background_repeat=”no-repeat” border_size=”0″ border_color=”” border_style=”solid” border_position=”all” padding=”” dimension_margin=”” animation_type=”” animation_direction=”left” animation_speed=”0.3″ animation_offset=”” last=”no” element_content=””][fusion_table]

Specifications: PAC-031 Spry drying type
Appearance: Solid powder, pale yellow to yellow
Odour: Odourless
Al 2 O 3, % : ≥ 29
Basicity, %: 50.0~90.0
Insolubles, % : 1.5 max
pH(1% water solution): 3.5~5.0

[/fusion_table][fusion_table]

ABOUT PRODUCT

CHEMICAL
NAME:

PAC-031 Spray drying type Polyaluminium Chloride

DESCRIPTION:

BLU PAC-031 type, it is Polyaluminium Chloride, spray drying type, yellow powder, used for water treatment, work as coagulant.

It is made by Ca(OH)3 and Bauxite.

ADVANTAGES:

  1. Can be used widely for industrial application.
  2. Easily soluble in water;dissolves rapidly.
  3. Cost is very low, very competitive than other general coagulants
  4. Dosage will be less(20-50%) than drum dried PAC
  5. Floc forming fast, good activity, good filtering.
  6. Don’t need adding alkaline additives, if deliquescence, its effect remain same.
  7. Adapted for a wide pH value, strong adaptability
  8. The Salt content in the effluent will be reduced after use PAC.
  9. Can remove the water pollution of heavy metals and radioactive substances.
  10. The active ingredient of high, convenient storage and transportation.

APPLICATION
FIELDS:

  1. Coagulant for different industrial area
  2. Clarifying agent in waste water
  3. Dewatering agent

[/fusion_table][fusion_table]

APPLICATION PROCESS

APPLICATION:

  1. Suggested to dilute to the concentration of 2%-20% solution before use.
  2. For Solid PAC product, dilution is necessary before being dosed, water amount for dilution shall be determined based on the amount of the chemicals to be dosed and the quality of water to be treated.
  3. For Solid PAC products, the dosage is about 1-15g/mt, the dosage of liquid PAC is 3-40g/mt, the best dosage is based on different  lab test results.

PACKAGE:

Packed in inner plastics bags(white or yellow) and polypropylene woven bags, with each bag containing 25kgs.

STORAGE:

Should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

[/fusion_table][/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]

Read more

Nonionic Polyacrylamide

NONIONIC POLYACRYLAMIDE POWDER

PRODUCTS PROPERTIES:

Products: Solid content: Effective pH: Bulk Density: Molecular Weight: Charge Degree
N850 89% min 2.0-9.0 0.8-1.0 High Low
N830 High Very Low
N630 Low Very Low

PRODUCT DESCRIPTION:

DESCRIPTION:

Blufloc Nonionic Polyacrylamide, is solid powder water-soluble polymer with
varying molecular weight and charge density.

It is most often used to
increase the viscosity of water (creating a thicker solution) or to encourage
flocculation of particles present in water and allow rapid settlement of finely
suspended solids.

It is a synthetic
chemical that can be tailored to fit a broad range of applications.

ADVANTAGES:

  1. Economical to use –
    lower dosage levels.
  2. Easily soluble in
    water; dissolves rapidly.
  3. Non corrosive of
    suggested dosage, economical and effective at low levels.
  4. Can eliminate the use
    of alum & further ferric salts when used as primary coagulants.
  5. Reduction in sludge
    of dewatering process system.

APPLICATION
FIELDS:

  • Raw Water Treatment
    • Flocculation
    • Clarification
  • Industrial Waste Water
    • Treatment
    • Primary Clarification
    • Secondary &Tertiary Treatment
    • Sludge Thickening & Dewatering
    • Color Removal  .
  • Sewage Treatment
    • Primary Treatment
    • Sludge Thickening & Dewatering
  • Process Industries
    • Textile Coating and Sizing Thickener
    • Mining & Metallurgy: Tailings Thickening and Water Recovery
    • Coal: Tailings:Thickening and Water Recovery
  • Petroleum and Gas Field
  • Drilling fluids, Lubrication

 

PACKAGING & STORAGE

 

PACKAGE:

Packed in kraft paper or PE bags with inner plastic bags, with each bag containing
25kgs.

STORAGE:

Should be stored in original containers in cool and dry place, away from sources of
heat, water and direct sunlight.

Shelf life is 2 years.

Read more

Cationic Polyacrylamide

BLUFLOC SERIES CATIONIC POLYACRYLAMIDE POWDER

PRODUCTS & PROPERTIES:

Products: Solid Content: Effective pH: Bulk Density: Molecular Weight: Charge Degree:
C8005 89% min 2.0-9.0 0.8-1.0 High Very Low
C8010 High Low
C8015 High Medium Low
C8020 High Medium
C8025 High Medium
C8030 High Medium High
C8040 High High
C8050 High Very High
C8060 High Ultra High
C9010 Very High Low
C9020 Very High Medium Low
C9030 Very High Medium
C9040 Very High High

Polyacrylamide-PHPANonionic-Polyacrylamide

Polyacrylamide-PHPANonionic-Polyacrylamide 1

ABOUT PRODUCT

DESCRIPTION:

Blufloc Cationic Polyacrylamide, is solid powder, water-soluble polymer with
varying molecular weight and charge density.

It is most often used in
sludge dewatering, water clarifying, or to encourage flocculation of particles
present in water and allow rapid settlement of finely suspended solids.

It is a
synthetic chemical that can be tailored to fit a broad range of applications.

ADVANTAGES:

  1. Superior dewatering performance at lower dose,
    reduce the water content in the mud cake from 98% to 70%.
  2. Achieve high solids capture, improve
    throughput and cake solids.
  3. Easily soluble in watersimple
    operation.
  4. Non corrosive of suggested dosage, economical
    and effective at low levels.
  5. Perform well over a wide PH
    range.

APPLICATION
FIELDS:

  • Raw Water Treatment:
    • Flocculation
    • Clarification
  • Industrial Waste Water Treatment:
    • Primary Clarification
    • Secondary & Tertiary Treatment
    • Sludge Thickening & Dewatering
    • Dissolved Air Floatation
  • Sewage Treatment:
    • Primary Treatment
    • Sludge Thickening & Dewatering
  • Process Industries:
    • Paper Making: Retention, Wet Strengthening Agent, Resident Agent
    • Sugar Manufacturing: Mud Settling
    • Chlor-alkali: Brine Clarification
    • Thermal Power: Clarification of Scrubber Water
    • Mining & Metallurgy: Tailings Thickening and Water Recovery
  • Petroleum and Gas Field:
    • Wastewater Clarification

PACKAGING AND STORAGE

PACKAGE:

Packed in kraft paper or PE bags with inner plastic bags, with each bag containing 25kgs.

STORAGE:

Should be stored in original containers in cool and dry place, away from sources of heat, water and
direct sunlight.

Shelf life is 2 years.

Read more

Anionic Polyacrylamide

[fusion_builder_container hundred_percent=”no” equal_height_columns=”no” menu_anchor=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” background_color=”” background_image=”” background_position=”center center” background_repeat=”no-repeat” fade=”no” background_parallax=”none” enable_mobile=”no” parallax_speed=”0.3″ video_mp4=”” video_webm=”” video_ogv=”” video_url=”” video_aspect_ratio=”16:9″ video_loop=”yes” video_mute=”yes” overlay_color=”” overlay_opacity=”0.5″ video_preview_image=”” border_size=”” border_color=”” border_style=”solid” margin_top=”” margin_bottom=”” padding_top=”20px” padding_right=”” padding_bottom=”20px” padding_left=””][fusion_builder_row][fusion_builder_column type=”1_1″ layout=”1_1″ spacing=”” center_content=”no” hover_type=”none” link=”” min_height=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” background_color=”” background_image=”” background_position=”left top” background_repeat=”no-repeat” border_size=”0″ border_color=”” border_style=”solid” border_position=”all” padding=”” dimension_margin=”” animation_type=”” animation_direction=”left” animation_speed=”0.3″ animation_offset=”” last=”no”][fusion_text]

blufloc, anionic polyacrylamide, polyacrylamide, polyelectrolyte, pam

[/fusion_text][fusion_text]

BLUFLOC SERIES
ANIONIC POLYACRYLAMIDE POWDER

[/fusion_text][fusion_table]

Products: Molecular Weight: Anionic Degree:
Copolymer of acrylamide and acrylic acid AA8520 Ultra High High
AA8519 Very High High
AA7518 Very High Medium
AA6518 Very High Medium
AA7517 Medium High Medium
AA6516 Medium High Medium
AA5415 Medium High Medium Low
AA5315 Medium High Medium Low
AA5410 Medium Low Low
For Oil HAA5412 Medium Low Medium Low
HAA6518 High Medium
HAA6520 Ultra High Medium High
HAA7525 Ultra High High

[/fusion_table][fusion_table]

PRODUCT INTRODUCTION:

DESCRIPTION:

Blufloc Anionic
Polyacrylamide,
is solid powder water-soluble polymer with varying molecular weight and charge
density.

It is most often used to increase the viscosity of water (creating a thicker solution) or to
encourage flocculation of particles present in water and allow rapid settlement
of finely suspended solids.

It is a synthetic chemical that can be tailored to fit a broad range of applications.

ADVANTAGES:

  1. Economical to use – lower dosage levels.
  2. Easily soluble in water; dissolves rapidly.
  3. Non corrosive of suggested dosage, economical and effective at low levels.
  4. Can eliminate the use of alum & further ferric salts when used as primary coagulants.
  5. Reduction in sludge of dewatering process system.

APPLICATION
FIELDS:

  • Raw Water Treatment
    • Flocculation
    • Clarification
    • Dewatering of Lime Alum Sludge and Recovery of Water
  • Industrial Waste Water Treatment
    • Primary Clarification
    • Secondary & Tertiary Treatment
    • Sludge Thickening & Dewatering
    • Color Removal
    • Dissolved Air Floatation
  • Sewage Treatment
    • Primary Treatment
    • Sludge Thickening & Dewatering
  • Process Industries
    • Sugar and Juice Industry: Clarification
    • Paper Making: Retention, Wet Strengthening Agent, Resident Agent &Water Recovery
    • Sugar Manufacturing:Mud Settling
    • Chlor-alkali: Brine Clarification
    • Thermal Power: Clarification of Scrubber Water
    • Mining & Metallurgy: Tailings Thickening and Water Recovery
    • Coal: Tailings Thickening and Water Recovery
    • Constructions: Solid and Road Stabilization, Concrete Making
  • Petroleum and Gas Field:
    • Drilling fluids, EOR, Profile Modification, Fluid loss control, Lubrication,Shale Stabilization

[/fusion_table][fusion_table]

PACKAGE AND STORAGE:

PACKAGE:

Packed in kraft
paper or PE bags with inner plastic bags, with each bag containing
25kgs.

STORAGE:

Should be stored in original containers in cool and dry
place, away from sources of heat, water and direct sunlight.

Shelf life is 2 years.

[/fusion_table][/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]

Read more
×