Reverse Osmosis Water Treatment Equipment

What is Reverse Osmosis?

Reverse osmosis (RO) is a membrane-technology filtration method that removes many types of large molecules and ions from solutions by applying pressure to the solution when it is on one side of a selective membrane. The result is that the solute is retained on the pressurized side of the membrane and the pure solvent is allowed to pass to the other side.

How Reverse Osmosis Works

In the normal osmosis process, the solvent naturally moves from an area of low solute concentration (High Water Potential), through a membrane, to an area of high solute concentration (Low Water Potential). The movement of a pure solvent to equalize solute concentrations on each side of a membrane generates osmotic pressure. Applying an external pressure to reverse the natural flow of pure solvent, thus, is reverse osmosis. The process is similar to other membrane technology applications. However, there are key differences between reverse osmosis and filtration. The predominant removal mechanism in membrane filtration is straining, or size exclusion, so the process can theoretically achieve perfect exclusion of particles regardless of operational parameters such as influent pressure and concentration.

Reverse osmosis, however, involves a diffusive mechanism so that separation efficiency is dependent on solute concentration, pressure, and water flux rate. Reverse osmosis is most commonly known for its use in drinking water purification from seawater, removing the salt and other substances from the water molecules.

The efficiency of a reverse osmosis water filter is affected by the water pressure coming into the system and the temperature of that water. Membranes are tested at 65 psi of pressure and a temperature of 77 degrees. For each incremental change in either variable, membrane performance changes accordingly. Higher pressures increase production and vice versa. The optimal pressure is 65 PSI and the temperature is 77°.

What are the Stages in a Reverse Osmosis System?

Below is a simplified and exploded diagram of a typical 4-stage reverse osmosis system. The stages have been numbered and the arrows show the directional flow of the water as it moves through the system. A larger diagram of the membrane is featured at the bottom to show its many layers, the component of the system that makes it a ‘reverse osmosis’ system.

 

 

Read more

Drink Water Filling Machine (3-in-1, 18000B/H, 500ml) CGF40-40-10

The machine is mainly applied for the filling of beverage. Integrating with washing, filling and sealing, it realizes full automation in the whole process, suitable for polyester bottle and plastic bottle filling of mineral water and purified water. The bottle types applicable for various parts are easily, conveniently and rapidly adjustable. It adopts new micro-negative pressure filling, stable and reliable. Compared with the machines of the same specification, the benefit of this machine is larger.

Read more

Pure Water Treatment Plant

Equipment of Pure Water Treatment Plant are silica sand filter, active carbon filter, sodium ion exchanger, hollow fiber, RO( reverse osmosis), UV sterilizer, precision filter, ozone generator, water tank etc. The treatment capacity is 0.5-50 ton/hour. It can effectively get rid of muddy organic matter, iron, manganese and oxide, filter suspended substance, colloid, remained oxygen of microorganism and some of heavy metal ion in the water, reduce the hardness of the water to make all specifications of the water quality fully meet the state fresh water standard of fresh drink water.

Read more

Brine Water Electrolysis System Low Concentration Sodium Hypochlorite Disinfection

Sodium hypochlorite generator is a combined form, by dilute brine gauging cast joined electrolytic tank, through thesilicon controlled rectifier connected to anode and cathode DC power supply electrolytic production of sodium hypochlorite.

1 kg of sodium hypochlorite salt consumption: 4.0-4.2; 4.3-4.5KW.

Sodium Hypochlorite producing line including Brine purification system, Electrolyzing System and Electric Control System.  The capacity of sodium hypochlorite solution shall be customized (available chlorine content).

  1. Brine purification system use chelating resin to remove the Ca2+, Mg2+ and other metal ions in saturated NaCI solution, so that  Ca2+  Mg2+  ion lower than 1ppm.
  2. Electrolyzing system includes membrane electrolyzing cell, high level chamber, gas and water separate, storage chamber etc. Chlorine gas and Hydrogen gas shall be separated completely and Hydrogen gas shall be safety discharged in air.
  3. Electric control system: PLC Control and touch screen display.
Read more

Water Treatment purification Activated Carbon

Basic Info

  • Artificial Graphite Type: Non-Standard Products
  • Carbon Content: High-Carbon
  • Manufacturing Method: Chemical Method of Activated Carbon
  • Appearance: Granular
  • Physical Properties: Mesh Number
  • Adsorption Properties: Water Volume
  • Active Carbon Material: Shell Activated Carbon
  • Pore Diameter: Mesoporous
  • Type: Liquid-Phase Adsorption
  • Usage: Environmental Protection Industry
  • Chemical Properties: Ph Value
  • Application: Water Prefiltration

Product Description

Activated Carbon for water treatment should have three requirements:

Large adsorption capacity

High adsorption speed

Good mechanical strength

The adsorption capacity of activated carbon with other external conditions, mainly with the specific surface area of activated carbon, specific surface area, pore-volume, the adsorbent can be adsorbed on the pore wall of the multi

Read more

Ultrafiltration RO Membrane For Filter Purifying System

Basic Info

  • Water Temperature: Other
  • Pipe Design Rate: Self-Cleaning
  • Function: Water Purification
  • Desalination: 97%
  • Water PH: 6.5 To 7.5
  • Concentration(NaCl): 500ppm
  • Operating Principle: RO
  • Water Purification Efficacy: Straight Drink
  • Descaling Function: Descaling Function
  • Application: Household Pre-Filtration
  • Color: Blue
  • Pressure: 65psi (0.45Mpa)
  • Max. Operating Pressure: 150psi (1.0Mpa)
  • Style for Purifier: Portable

Product Description

Ro Membrane application: Household Filtration And Industry Filtration
RO Membrane capacity:50GPD-500GPD

Read more

Industrial Water RO Purification System

Basic Info

  • Operating Principle: RO
  • Water Purification Efficacy: Straight Drink
  • Descaling Function: Descaling Function
  • Flow Rate: 1000L/H
  • Input Power: 2-20KW
  • Operating Temperiture: 15°C-45°C
  • Style for Purifier: Portable
  • Certification: CE, RoHS, GS, SASO, EMC
  • Water Temperature: Warm & Hot
  • Pipe Design Rate: Self-Cleaning
  • Working Pressure: 0.6-1.6 Mpa
  • Power Supply: AC380V 35A 50Hz

Product Description

Ro System Product detail:

  • Sand filter
  • Activated Carbon filter
  • Ion ecxhange water sofener
  • Cartridge filter
  • Water pump
  • Ro Membrane
  • UV Sterilizer
Read more

RO Water Purification System For Drinking Water Treatment

Basic Info

  • Model No.: 1000L
  • Operating Principle: RO
  • Water Purification Efficacy: Straight Drink
  • Descaling Function: Descaling Function
  • Flow Rate: 1000L/H
  • Input Power: 2-20KW
  • Operating Temperiture: 15°C-45°C
  • Style for Purifier: Portable
  • Certification: CE, RoHS, GS, SASO, EMC
  • Water Temperature: Warm & Hot
  • Pipe Design Rate: Self-Cleaning
  • Working Pressure: 0.6-1.6 Mpa
  • Power Supply: AC380V 35A 50Hz

Product Description

  • Flow Rate : 1000 ltr/hr
  • Power Consumption : 60W(in use)
  • Power Supply : 220 Volt, AC
  • Purification : 5 stages
    • Parts and components are from imported countries and China with advanced technology.
    • High integration and reliablequality.
    • A high degree of automation, when there is a fault it will stop immediately,withstrongability of automatic protection.
    • Highdesalination rate ,it is up to 98% or more.

RO Water Purification System For Drinking Water Treatment description

Read more
×